Aircraft Engine Events

AIRCRAFT ENGINE EVENTS

The event IDs listed here are all related to the aircraft engines.

Anti-Ice

Event Name	Parameters	Description
`ANTI_ICE_GRADUAL_SET`	[0]: Position (0 - 16384)	Sets engine anti-ice switch to a value between 0 and 16384. Controlled engines are set through the SimVar `ENGINE CONTROL SELECT`.
`ANTI_ICE_GRADUAL_SET_ENG1` `ANTI_ICE_GRADUAL_SET_ENG2` `ANTI_ICE_GRADUAL_SET_ENG3` `ANTI_ICE_GRADUAL_SET_ENG4`	[0]: Position (0 - 16384)	Sets the engine 1/2/3/4 anti-ice switch to a value between 0 and 16384.
`ANTI_ICE_ON`	N/A	Sets anti-ice switches on Controlled engines are set through the SimVar `ENGINE CONTROL SELECT`.
`ANTI_ICE_OFF`	N/A	Sets anti-ice switches off. Controlled engines are set through the SimVar `ENGINE CONTROL SELECT`.
`ANTI_ICE_SET`	[0]: Bool	Sets anti-ice switches from argument (0,1). Controlled engines are set through the SimVar `ENGINE CONTROL SELECT`.
`ANTI_ICE_SET_ENG1` `ANTI_ICE_SET_ENG2` `ANTI_ICE_SET_ENG3` `ANTI_ICE_SET_ENG4`	[0]: Bool	Sets engine 1/2/3/4 anti-ice switch (0,1)
`ANTI_ICE_TOGGLE`	N/A	Toggle anti-ice switches. Controlled engines are set through the SimVar `ENGINE CONTROL SELECT`.
`ANTI_ICE_TOGGLE_ENG1` `ANTI_ICE_TOGGLE_ENG2` `ANTI_ICE_TOGGLE_ENG3` `ANTI_ICE_TOGGLE_ENG4`	N/A	Toggle engine 1/2/3/4 anti-ice switch on (1) or off (0).

Condition Lever

Event Name	Parameters	Description
`AXIS_CONDITION_LEVER_1_SET` `AXIS_CONDITION_LEVER_2_SET` `AXIS_CONDITION_LEVER_3_SET` `AXIS_CONDITION_LEVER_4_SET`	[0]: Axis value	Sets the condition lever position based on the percentage final value of axis the input where: 0% - 33.3% = cutoff 33.3% - 66.6% = low idle 66.6% - 100% = high
`CONDITION_LEVER_CUT_OFF`	[0]: Engine index	Sets the condition lever for the indexed engine to the cutoff position, which cuts the fuel flow. Not currently used in the simulation.
`CONDITION_LEVER_DEC`	[0]: Engine index	Decrements the condition lever position by one for the indexed engine. The possible lever positions are as follows: 0 for cutoff 1 for low idle 2 for high
`CONDITION_LEVER_HIGH_IDLE`	[0]: Engine index	Sets the condition lever for the indexed engine to the high position (2). Not currently used in the simulation.
`CONDITION_LEVER_INC`	[0]: Engine index	Increments the condition lever position by one for the indexed engine. The possible lever positions are as follows: 0 for cutoff 1 for low idle 2 for high
`CONDITION_LEVER_LOW_IDLE`	[0]: Engine index	Sets the condition lever for the indexed engine to the low position (1). Not currently used in the simulation.
`CONDITION_LEVER_SET`	[0]: Position	Sets the condition lever for the all engines to the given position, which is one of the following: 0 for cutoff 1 for low idle 2 for high
`CONDITION_LEVER_1_CUT_OFF` `CONDITION_LEVER_2_CUT_OFF` `CONDITION_LEVER_3_CUT_OFF` `CONDITION_LEVER_4_CUT_OFF`	N/A	Sets the condition lever for engine 1/2/3/4 to the cutoff position, which cuts the fuel flow. Not currently used in the simulation.
`CONDITION_LEVER_1_DEC` `CONDITION_LEVER_2_DEC` `CONDITION_LEVER_3_DEC` `CONDITION_LEVER_4_DEC`	N/A	Decreases the condition lever position by one for engine 1/2/3/4. The possible lever positions are as follows: 0 for cutoff 1 for low idle 2 for high
`CONDITION_LEVER_1_HIGH_IDLE` `CONDITION_LEVER_2_HIGH_IDLE` `CONDITION_LEVER_3_HIGH_IDLE` `CONDITION_LEVER_4_HIGH_IDLE`	N/A	Sets the condition lever for engine 1/2/3/4 to the high position (2). Not currently used in the simulation.
`CONDITION_LEVER_1_INC` `CONDITION_LEVER_2_INC` `CONDITION_LEVER_3_INC` `CONDITION_LEVER_4_INC`	N/A	Increments the condition lever position by one for engine 1/2/3/4. The possible lever positions are as follows: 0 for cutoff 1 for low idle 2 for high
`CONDITION_LEVER_1_LOW_IDLE` `CONDITION_LEVER_2_LOW_IDLE` `CONDITION_LEVER_3_LOW_IDLE` `CONDITION_LEVER_4_LOW_IDLE`	N/A	Sets the condition lever for engine 1/2/3/4 to the low position (1). Not currently used in the simulation.
`CONDITION_LEVER_1_SET` `CONDITION_LEVER_2_SET` `CONDITION_LEVER_3_SET` `CONDITION_LEVER_4_SET`	[0]: Position	Sets the condition lever for engine 1/2/3/4 to the given position, which is one of the following: 0 for cutoff 1 for low idle 2 for high

Fuel

Event Name	Parameters	Description
`AXIS_MIXTURE_SET`
`AXIS_MIXTURE1_SET` `AXIS_MIXTURE2_SET` `AXIS_MIXTURE3_SET` `AXIS_MIXTURE4_SET`
`FUEL_PUMP`	N/A	Toggle electric fuel pumps
`MIXTURE_DECR`	N/A	Decrement mixture levers
`MIXTURE1_DECR` `MIXTURE2_DECR` `MIXTURE3_DECR` `MIXTURE4_DECR`	N/A	Decrement mixture lever 1/2/3/4
`MIXTURE_DECR_SMALL`	N/A	Decrement mixture levers small
`MIXTURE1_DECR_SMALL` `MIXTURE2_DECR_SMALL` `MIXTURE3_DECR_SMALL` `MIXTURE4_DECR_SMALL`	N/A	Decrement mixture 1/2/3/4 lever small
`MIXTURE_INCR`	N/A	Increment mixture levers
`MIXTURE1_INCR` `MIXTURE2_INCR` `MIXTURE3_INCR` `MIXTURE4_INCR`	N/A	Increment mixture lever 1/2/3/4
`MIXTURE_INCR_SMALL`	N/A	Increment mixture levers small
`MIXTURE1_INCR_SMALL` `MIXTURE2_INCR_SMALL` `MIXTURE3_INCR_SMALL` `MIXTURE4_INCR_SMALL`	N/A	Increment mixture lever 1/2/3/4 small
`MIXTURE_LEAN`	N/A	Set mixture levers to max lean
`MIXTURE1_LEAN` `MIXTURE2_LEAN` `MIXTURE3_LEAN` `MIXTURE4_LEAN`	N/A	Set mixture lever 1/2/3/4 to max lean
`MIXTURE_RICH`	N/A	Set mixture levers to max rich
`MIXTURE1_RICH` `MIXTURE2_RICH` `MIXTURE3_RICH` `MIXTURE4_RICH`	N/A	Set mixture lever 1/2/3/4 to max rich
`MIXTURE_SET`		Engine mixture set.
`MIXTURE_SET_BEST`
`MIXTURE1_SET` `MIXTURE2_SET` `MIXTURE3_SET` `MIXTURE4_SET`		Set engine 1/2/3/4 mixture.
`SET_FUEL_VALVE_ENG1` `SET_FUEL_VALVE_ENG2` `SET_FUEL_VALVE_ENG3` `SET_FUEL_VALVE_ENG4`	N/A
`SHUTOFF_VALVE_TOGGLE`	N/A	Toggle the status of the fuel shutoff valve (used on piston engine to enable/disable fuel arrival).
`SHUTOFF_VALVE_ON`	N/A	Turns on the fuel shutoff valve (used on piston engines to enable fuel arrival).
`SHUTOFF_VALVE_OFF`	N/A	Turns off the fuel shutoff valve (used on piston engines to disable fuel arrival).
`TOGGLE_ELECT_FUEL_PUMP`	N/A	Toggle electric fuel pumps
`TOGGLE_ELECT_FUEL_PUMP1` `TOGGLE_ELECT_FUEL_PUMP2` `TOGGLE_ELECT_FUEL_PUMP3` `TOGGLE_ELECT_FUEL_PUMP4`	N/A	Toggle engine 1/2/3/4 electric fuel pump
`TOGGLE_FUEL_VALVE_ALL`	N/A	Toggle engine fuel valves
`TOGGLE_FUEL_VALVE_ENG1` `TOGGLE_FUEL_VALVE_ENG2` `TOGGLE_FUEL_VALVE_ENG3` `TOGGLE_FUEL_VALVE_ENG4`	N/A	Toggle engine 1/2/3/4 fuel valve

Magneto

Event Name	Parameters	Description
`MAGNETO`	[0]: Magneto index	Selects magnetos (for +/- sequence)
`MAGNETO_BOTH`	[0]: Magneto index	Set indexed engine magnetos on
`MAGNETO1_BOTH` `MAGNETO2_BOTH` `MAGNETO3_BOTH` `MAGNETO4_BOTH`	N/A	Set engine 1/2/3/4 magnetos on
`MAGNETO_DECR`	N/A	Decrease all magneto switches positions
`MAGNETO1_DECR` `MAGNETO2_DECR` `MAGNETO3_DECR` `MAGNETO4_DECR`	N/A	Decrease engine 1/2/3/4 magneto switch position
`MAGNETO_INCR`	N/A	Increase all magneto switches positions
`MAGNETO1_INCR` `MAGNETO2_INCR` `MAGNETO3_INCR` `MAGNETO4_INCR`	N/A	Increase engine 1/2/3/4 magneto switch position
`MAGNETO_LEFT`	N/A	Toggle all engine left magnetos
`MAGNETO1_LEFT` `MAGNETO2_LEFT` `MAGNETO3_LEFT` `MAGNETO4_LEFT`	N/A	Toggle engine 1/2/3/4 left magneto
`MAGNETO_OFF`	N/A	Set all engine magnetos off
`MAGNETO1_OFF` `MAGNETO2_OFF` `MAGNETO3_OFF` `MAGNETO4_OFF`	N/A	Set engine 1/2/3/4 magnetos off
`MAGNETO_RIGHT`	N/A	Toggle all engine right magnetos
`MAGNETO1_RIGHT` `MAGNETO2_RIGHT` `MAGNETO3_RIGHT` `MAGNETO4_RIGHT`	N/A	Toggle engine 1/2/3/4 right magneto
`MAGNETO_SET`	[0]: True/False (1, 0)	Sets all engine magnetos (0,1) Not currently used in the simulation.
`MAGNETO1_SET` `MAGNETO2_SET` `MAGNETO3_SET` `MAGNETO4_SET`	N/A	Set engine 1/2/3/4 magneto switch Not currently used in the simulation.
`MAGNETO_START`	N/A	Set all engine magnetos on and toggle starters
`MAGNETO1_START` `MAGNETO2_START` `MAGNETO3_START` `MAGNETO4_START`	N/A	Set engine 1/2/3/4 magnetos on and toggle starter

Miscellaneous

Event Name	Parameters	Description
`COWLFLAP1_SET` `COWLFLAP2_SET` `COWLFLAP3_SET` `COWLFLAP4_SET`	[0]: position from 0 to 16983	Sets engine 1/2/3/4 cowl flap lever position (0 to 16383)
`DEC_COWL_FLAPS`	N/A	Decrement cowl flap levers
`DEC_COWL_FLAPS1` `DEC_COWL_FLAPS2` `DEC_COWL_FLAPS3` `DEC_COWL_FLAPS4`	N/A	Decrement engine 1 cowl flap lever
`ENGINE`	N/A	Sets engines for 1,2,3,4 selection (to be followed by SELECT_n)
`ENGINE_AUTO_START`	N/A	Triggers auto-start
`ENGINE_AUTO_SHUTDOWN`	N/A	Triggers auto-shutdown
`ENGINE_BLEED_AIR_SOURCE_SET`	[0]: The engine index to target (from 1 to 4) [1]: Set to TRUE/FALSE to set the engine as source (TRUE) or not (FALSE)	Sets if the indexed engine is a source to the bleed air system or not.
`ENGINE_BLEED_AIR_SOURCE_TOGGLE`	[0]: The engine index to target (from 1 to 4, or 0 for all engines)	Toggles the indexed engine as a source to the bleed air system. Note that if you supply 0 instead of a single engine index, then the event will target all engines.
`ENGINE_MASTER_SET`
`ENGINE_MASTER_1_SET` `ENGINE_MASTER_2_SET` `ENGINE_MASTER_3_SET` `ENGINE_MASTER_4_SET`	N/A
`ENGINE_MASTER_TOGGLE`	N/A
`ENGINE_MASTER_1_TOGGLE` `ENGINE_MASTER_2_TOGGLE` `ENGINE_MASTER_3_TOGGLE` `ENGINE_MASTER_4_TOGGLE`	N/A
`ENGINE_MODE_CRANK_SET`
`ENGINE_MODE_NORM_SET`
`ENGINE_MODE_IGN_START`
`ENGINE_PRIMER`	N/A	Trigger engine primers
`INC_COWL_FLAPS`	N/A	Increment cowl flap levers
`INC_COWL_FLAPS1` `INC_COWL_FLAPS2` `INC_COWL_FLAPS3` `INC_COWL_FLAPS4`	N/A	Increment engine 1/2/3/4 cowl flap lever
`OIL_COOLING_FLAPS_DOWN`	N/A
`OIL_COOLING_FLAPS_SET`
`OIL_COOLING_FLAPS_TOGGLE`	N/A
`OIL_COOLING_FLAPS_UP`	N/A
`RADIATOR_COOLING_FLAPS_DOWN`	N/A
`RADIATOR_COOLING_FLAPS_SET`
`RADIATOR_COOLING_FLAPS_TOGGLE`	N/A
`RADIATOR_COOLING_FLAPS_UP`	N/A
`TOGGLE_MASTER_IGNITION_SWITCH`	N/A	Toggles master ignition switch
`TOGGLE_PRIMER`	N/A	Trigger engine primers
`TOGGLE_PRIMER1` `TOGGLE_PRIMER2` `TOGGLE_PRIMER3` `TOGGLE_PRIMER4`	N/A	Trigger engine 1/2/3/4 primer
`TOGGLE_AFTERBURNER`	N/A	Toggles afterburners
`TOGGLE_AFTERBURNER1` `TOGGLE_AFTERBURNER2` `TOGGLE_AFTERBURNER3` `TOGGLE_AFTERBURNER4`	N/A	Toggles engine 1/2/3/4 afterburner

Propeller

Event Name	Parameters	Description
`AXIS_PROPELLER_SET`	N/A	Set propeller levers exact value (-16383 to +16383)
`AXIS_PROPELLER1_SET` `AXIS_PROPELLER2_SET` `AXIS_PROPELLER3_SET` `AXIS_PROPELLER4_SET`	N/A	Set propeller lever 1/2/3/4 exact value (-16383 to +16383)
`PROP_FORCE_BETA_OFF`	[0]: The engine index to target (from 1 to 4, or 0 for all engines)	This key allows you to disable the propeller Force Beta mode, in which case the internal coded simulation logic to drive the beta is used instead of the value from `PROP BETA FORCED POSITION`.
`PROP_FORCE_BETA_ON`	[0]: The engine index to target (from 1 to 4, or 0 for all engines)	This keys allows you to enable the propeller Force Beta mode, in which case the sim logic to drive the beta is ignored and instead the value from `PROP BETA FORCED POSITION` is used.
`PROP_FORCE_BETA_SET`	[0]: The engine index to target (from 1 to 4, or 0 for all engines) [1]: Whether or not to force the prop beta (Boolean).	This key allows you to set the propeller to be in Force Beta mode, in which case the internal coded simulation logic that normally drives the beta is ignored and instead the value from `PROP BETA FORCED POSITION` is used.
`PROP_FORCE_BETA_TOGGLE`	[0]: The engine index to target (from 1 to 4, or 0 for all engines)	This key allows you to toggle between the normal and Force Beta mode. If enabled, the Force Beta mode will prevent the internal coded simulation logic from driving the beta and instead allow you to control it with the value from `PROP BETA FORCED POSITION`.
`PROP_FORCE_BETA_VALUE_SET`	[0]: The engine index to target (from 1 to 4, or 0 for all engines) [1]: The angle that the prop should be forced to. This is stored as the 16k representation of an angle between -180 degrees and + 180 degrees	This key allows you to set the value that the prop will attempt to reach when in Forced Beta mode (this will have the same effect as setting the `PROP BETA FORCED POSITION` SimVar).
`PROP_LOCK_OFF`	N/A
`PROP_LOCK_ON`	N/A
`PROP_LOCK_SET`	[0]: True/False (1, 0)
`PROP_LOCK_TOGGLE`	N/A
`PROP_PITCH_AXIS_SET_EX1`	N/A
`PROP_PITCH1_AXIS_SET_EX1` `PROP_PITCH2_AXIS_SET_EX1` `PROP_PITCH3_AXIS_SET_EX1` `PROP_PITCH4_AXIS_SET_EX1`	N/A
`PROP_PITCH_DECR`	N/A	Decrement prop pitch levers
`PROP_PITCH1_DECR` `PROP_PITCH2_DECR` `PROP_PITCH3_DECR` `PROP_PITCH4_DECR`	N/A	Decrement prop pitch lever 1/2/3/4
`PROP_PITCH_DECR_SMALL`	N/A	Decrease prop levers small
`PROP_PITCH1_DECR_SMALL` `PROP_PITCH2_DECR_SMALL` `PROP_PITCH3_DECR_SMALL` `PROP_PITCH4_DECR_SMALL`	N/A	Decrease prop lever 1/2/3/4 small
`PROP_PITCH_DECREASE_EX1`	N/A
`PROP_PITCH1_DECREASE_EX1` `PROP_PITCH2_DECREASE_EX1` `PROP_PITCH3_DECREASE_EX1` `PROP_PITCH4_DECREASE_EX1`	N/A
`PROP_PITCH_DECREASE_SMALL_EX1`	N/A
`PROP_PITCH1_DECREASE_SMALL_EX1` `PROP_PITCH2_DECREASE_SMALL_EX1` `PROP_PITCH3_DECREASE_SMALL_EX1` `PROP_PITCH4_DECREASE_SMALL_EX1`	N/A
`PROP_PITCH_HI`	N/A	Set prop pitch levers min (hi pitch)
`PROP_PITCH1_HI` `PROP_PITCH2_HI` `PROP_PITCH3_HI` `PROP_PITCH4_HI`	N/A	Set prop pitch lever 1/2/3/4 min (hi pitch)
`PROP_PITCH_HI_EX1`	N/A	Set prop pitch levers min (hi pitch)
`PROP_PITCH1_HI_EX1` `PROP_PITCH2_HI_EX1` `PROP_PITCH3_HI_EX1` `PROP_PITCH4_HI_EX1`	N/A	Set prop pitch lever 1/2/3/4 min (hi pitch)
`PROP_PITCH_INCR`	N/A	Increment prop pitch levers
`PROP_PITCH1_INCR` `PROP_PITCH2_INCR` `PROP_PITCH3_INCR` `PROP_PITCH4_INCR`	N/A	Increment prop pitch lever 1/2/3/4
`PROP_PITCH_INCR_SMALL`	N/A	Increment prop pitch levers small
`PROP_PITCH1_INCR_SMALL` `PROP_PITCH2_INCR_SMALL` `PROP_PITCH3_INCR_SMALL` `PROP_PITCH4_INCR_SMALL`	N/A	Increment prop pitch lever 1/2/3/4 small
`PROP_PITCH_INCREASE_EX1`	N/A
`PROP_PITCH1_INCREASE_EX1` `PROP_PITCH2_INCREASE_EX1` `PROP_PITCH3_INCREASE_EX1` `PROP_PITCH4_INCREASE_EX1`	N/A
`PROP_PITCH_INCREASE_SMALL_EX1`	N/A
`PROP_PITCH1_INCREASE_SMALL_EX1` `PROP_PITCH2_INCREASE_SMALL_EX1` `PROP_PITCH3_INCREASE_SMALL_EX1` `PROP_PITCH4_INCREASE_SMALL_EX1`	N/A
`PROP_PITCH_LO`	N/A	Set prop pitch levers max (lo pitch)
`PROP_PITCH1_LO` `PROP_PITCH2_LO` `PROP_PITCH3_LO` `PROP_PITCH4_LO`	N/A	Set prop pitch lever 1/2/3/4 max (lo pitch)
`PROP_PITCH_LO_EX1`	N/A	Set prop pitch levers max (lo pitch)
`PROP_PITCH1_LO_EX1` `PROP_PITCH2_LO_EX1` `PROP_PITCH3_LO_EX1` `PROP_PITCH4_LO_EX1`	N/A	Set prop pitch lever 1/2/3/4 max (lo pitch)
`PROP_PITCH_SET`	N/A	Set prop pitch levers (0 to 16383)
`PROP_PITCH1_SET` `PROP_PITCH2_SET` `PROP_PITCH3_SET` `PROP_PITCH4_SET`	N/A	Set prop pitch lever 1/2/3/4 exact value (0 to 16383)
`TOGGLE_PROPELLER_SYNC`	N/A	Turns propeller synchronization switch on
`PROPELLER_REVERSE_THRUST_TOGGLE`	N/A
`PROPELLER_REVERSE_THRUST_HOLD`	N/A
`TOGGLE_AUTOFEATHER_ARM`	N/A	Turns auto-feather arming switch on.
`TOGGLE_FEATHER_SWITCHES`	N/A	Trigger propeller switches
`TOGGLE_FEATHER_SWITCH_1` `TOGGLE_FEATHER_SWITCH_2` `TOGGLE_FEATHER_SWITCH_3` `TOGGLE_FEATHER_SWITCH_4`	N/A	Trigger propeller 1/2/3/4 switch
`TOGGLE_PROPELLER_DEICE`	N/A	Toggles propeller deice switch

Throttle

Event Name	Parameters	Description
`AXIS_THROTTLE_MINUS`	[0]: the value between 0 - 16384	Subtracts the given value from the throttle of all engines (the final position will depend on the `min_throttle_limit` value).
`AXIS_THROTTLE_PLUS`	[0]: the value between 0 - 16384	Adds to the throttle of all engines a value comprised between 0 and 16384.
`AXIS_THROTTLE_SET`		Set throttles (0- 16383)
`AXIS_THROTTLE1_SET` `AXIS_THROTTLE2_SET` `AXIS_THROTTLE3_SET` `AXIS_THROTTLE4_SET`		Set throttle 1/2/3/4 exactly (0 - 16383)
`DECREASE_THROTTLE`		Decrement throttles
`INCREASE_THROTTLE`		Increment throttles
`SET_REVERSE_THRUST_OFF`	N/A	Turn off throttle reverse thrust for all engines.
`SET_REVERSE_THRUST_ON`	N/A	Turn on throttle reverse thrust for all engines.
`SET_THROTTLE1_REVERSE_THRUST_OFF` `SET_THROTTLE2_REVERSE_THRUST_OFF` `SET_THROTTLE3_REVERSE_THRUST_OFF` `SET_THROTTLE4_REVERSE_THRUST_OFF`	N/A	Turn off the throttle reverse thrust for engine 1/2/3/4.
`SET_THROTTLE1_REVERSE_THRUST_ON` `SET_THROTTLE2_REVERSE_THRUST_ON` `SET_THROTTLE3_REVERSE_THRUST_ON` `SET_THROTTLE4_REVERSE_THRUST_ON`	N/A	Turn on the throttle reverse thrust for engine 1/2/3/4.
`THROTTLE_INCR`	N/A	Increase all throttles by 10%.
`THROTTLE_DECR`	N/A	Decrease all throttles by 10%.
`THROTTLE1_DECR` `THROTTLE2_DECR` `THROTTLE3_DECR` `THROTTLE4_DECR`	N/A	Decrement throttle 1/2/3/4 by 10%.
`THROTTLE_10`		Set throttles to 10%
`THROTTLE_20`		Set throttles to 20%
`THROTTLE_30`		Set throttles to 30%
`THROTTLE_40`		Set throttles to 40%
`THROTTLE_50`		Set throttles to 50%
`THROTTLE_60`		Set throttles to 60%
`THROTTLE_70`		Set throttles to 70%
`THROTTLE_80`		Set throttles to 80%
`THROTTLE_90`		Set throttles to 90%
`THROTTLE_AXIS_SET_EX1`
`THROTTLE1_AXIS_SET_EX1` `THROTTLE2_AXIS_SET_EX1` `THROTTLE3_AXIS_SET_EX1` `THROTTLE4_AXIS_SET_EX1`
`THROTTLE_CUT`		Set throttles to idle
`THROTTLE1_CUT` `THROTTLE2_CUT` `THROTTLE3_CUT` `THROTTLE4_CUT`		Set throttle 1/2/3/4 to idle
`THROTTLE_CUT_EX1`
`THROTTLE1_CUT_EX1` `THROTTLE2_CUT_EX1` `THROTTLE3_CUT_EX1` `THROTTLE4_CUT_EX1`
`THROTTLE_DECR_SMALL`
`THROTTLE1_DECR_SMALL` `THROTTLE2_DECR_SMALL` `THROTTLE3_DECR_SMALL` `THROTTLE4_DECR_SMALL`
`THROTTLE_DECREASE_EX1`		Decrement throttles
`THROTTLE1_DECREASE_EX1` `THROTTLE2_DECREASE_EX1` `THROTTLE3_DECREASE_EX1` `THROTTLE4_DECREASE_EX1`		Decrement throttle 1/2/3/4
`THROTTLE_DECREASE_SMALL_EX1`		Decrease throttles small
`THROTTLE1_DECREASE_SMALL_EX1` `THROTTLE2_DECREASE_SMALL_EX1` `THROTTLE3_DECREASE_SMALL_EX1` `THROTTLE4_DECREASE_SMALL_EX1`		Decrease throttle 1/2/3/4 small
`THROTTLE_FULL`		Set throttles max
`THROTTLE1_FULL` `THROTTLE2_FULL` `THROTTLE3_FULL` `THROTTLE4_FULL`		Set throttle 1/2/3/4 max
`THROTTLE_FULL_EX1`		Set throttles max
`THROTTLE1_FULL_EX1` `THROTTLE2_FULL_EX1` `THROTTLE3_FULL_EX1` `THROTTLE4_FULL_EX1`		Set throttle 1/2/3/4 max
`THROTTLE_INCREASE_EX1`		Increment throttles
`THROTTLE1_INCR` `THROTTLE2_INCR` `THROTTLE3_INCR` `THROTTLE4_INCR`
`THROTTLE1_INCREASE_EX1` `THROTTLE2_INCREASE_EX1` `THROTTLE3_INCREASE_EX1` `THROTTLE4_INCREASE_EX1`		Increment throttle 1/2/3/4
`THROTTLE_INCREASE_SMALL_EX1`		Increment throttles small
`THROTTLE1_INCR_SMALL` `THROTTLE2_INCR_SMALL` `THROTTLE3_INCR_SMALL` `THROTTLE4_INCR_SMALL`
`THROTTLE1_INCREASE_SMALL_EX1` `THROTTLE2_INCREASE_SMALL_EX1` `THROTTLE3_INCREASE_SMALL_EX1` `THROTTLE4_INCREASE_SMALL_EX1`		Increment throttle 1/2/3/4 small
`THROTTLE_REVERSE_THRUST_TOGGLE`
`THROTTLE_REVERSE_THRUST_HOLD`
`THROTTLE1_REVERSE_THRUST_HOLD` `THROTTLE2_REVERSE_THRUST_HOLD` `THROTTLE3_REVERSE_THRUST_HOLD` `THROTTLE4_REVERSE_THRUST_HOLD`
`THROTTLE_SET`		Set throttles exactly (0- 16383)
`THROTTLE1_SET` `THROTTLE2_SET` `THROTTLE3_SET` `THROTTLE4_SET`		Set throttle 1/2/3/4 exactly (0 to 16383)
`TOGGLE_THROTTLE1_REVERSE_THRUST` `TOGGLE_THROTTLE2_REVERSE_THRUST` `TOGGLE_THROTTLE3_REVERSE_THRUST` `TOGGLE_THROTTLE4_REVERSE_THRUST`	N/A	Toggle on or off the reverse thruster for engine 1/2/3/4

Turbine

Event Name	Parameters	Description
`ISOLATE_TURBINE_SET`	[0]: Engine index (1 to 4) [1]: State (TRUE / FALSE)	Setting this to TRUE will "isolate" the engine, effectively nullyfing the engine drag and thrust. This key takes two parameters: an engine number (from 1 to 4 to flag a specific engine, or 0 to affect all engines), and a TRUE / FALSE second parameter to set the engine isolation. IMPORTANT: This event is only applicable to the DarkStar aircraft and should not be used for your own aircraft.
`ISOLATE_TURBINE_ON`	[0]: Engine index (1 to 4)	Using this key will "isolate" the given engine, effectively nullyfing the engine drag and thrust. This key takes an engine number as a parameter (from 1 to 4 to flag a specific engine, or 0 to affect all engines). IMPORTANT: This event is only applicable to the DarkStar aircraft and should not be used for your own aircraft.
`ISOLATE_TURBINE_OFF`	[0]: Engine index (1 to 4)	Using this key will end the "isolation" for the engine, effectively enabling the engine drag and thrust again. This key takes an engine number as a parameter (from 1 to 4 to flag a specific engine, or 0 to affect all engines). IMPORTANT: This event is only applicable to the DarkStar aircraft and should not be used for your own aircraft.
`ISOLATE_TURBINE_TOGGLE`	[0]: Engine index (1 to 4)	This key can be used to toggle an engines "isolated" state, where an isolated engine has its drag and thrust effectively nullified. This key takes an engine number as a parameter (from 1 to 4 to flag a specific engine, or 0 to affect all engines). IMPORTANT: This event is only applicable to the DarkStar aircraft and should not be used for your own aircraft.
`TURBINE_IGNITION_SWITCH_SET`
`TURBINE_IGNITION_SWITCH_SET1` `TURBINE_IGNITION_SWITCH_SET2` `TURBINE_IGNITION_SWITCH_SET3` `TURBINE_IGNITION_SWITCH_SET4`
`TURBINE_IGNITION_SWITCH_TOGGLE`		Turn the turbine ignition switch on or off.

Starter

Event Name	Parameters	Description
`JET_STARTER`	[0]: Index	Selects jet engine starter (for +/- sequence)
`SET_STARTER1_HELD`	[0]: Bool	Set the Starter for engine 1 to on or off. If set to on (TRUE) the starter will stay on, and setting the event to off (FALSE) will disable the starter, but only after the engine RPM is above the 50% threshold. To disable the starter immediately you should use `STARTER1_SET`, and note that turbine engines will need both these events triggered to off (FALSE).
`SET_STARTER2_HELD`	[0]: Bool	Set the Starter for engine 2 to on or off. If set to on (TRUE) the starter will stay on, and setting the event to off (FALSE) will disable the starter, but only after the engine RPM is above the 50% threshold. To disable the starter immediately you should use `STARTER2_SET`, and note that turbine engines will need both these events triggered to off (FALSE).
`SET_STARTER3_HELD`	[0]: Bool	Set the Starter for engine 3 to on or off. If set to on (TRUE) the starter will stay on, and setting the event to off (FALSE) will disable the starter, but only after the engine RPM is above the 50% threshold. To disable the starter immediately you should use `STARTER3_SET`, and note that turbine engines will need both these events triggered to off (FALSE).
`SET_STARTER4_HELD`	[0]: Bool	Set the Starter for engine 4 to on or off. If set to on (TRUE) the starter will stay on, and setting the event to off (FALSE) will disable the starter, but only after the engine RPM is above the 50% threshold. To disable the starter immediately you should use `STARTER4_SET`, and note that turbine engines will need both these events triggered to off (FALSE).
`SET_STARTER_ALL_HELD`	[0]: Bool	Set the Starter for all engines to on or off. If set to on (TRUE) the starter will stay on until set to off (FALSE) with another call to the event.
`STARTER_GEN`		Not used in the simulation.
`STARTER_OFF`		Not used in the simulation.
`STARTER_SET`	[0]: Bool	Set the status of the current controlled engine starters to On/Off. Controlled engines are set through the SimVar `ENGINE CONTROL SELECT`.
`STARTER1_SET`	[0]: Bool	Set the Starter for engine 1 to on or off. Note that the starter will only stay on for a short time before switching itself off again on piston engines. If you wish the starter to stay on, use `SET_STARTER1_HELD`.
`STARTER2_SET`	[0]: Bool	Set the Starter for engine 1 to on or off. Note that the starter will only stay on for a short time before switching itself off again on piston engines. If you wish the starter to stay on, use `SET_STARTER2_HELD`.
`STARTER3_SET`	[0]: Bool	Set the Starter for engine 1 to on or off. Note that the starter will only stay on for a short time before switching itself off again on piston engines. If you wish the starter to stay on, use `SET_STARTER3_HELD`.
`STARTER4_SET`	[0]: Bool	Set the Starter for engine 1 to on or off. Note that the starter will only stay on for a short time before switching itself off again on piston engines. If you wish the starter to stay on, use `SET_STARTER4_HELD`.
`STARTER_START`		Not used in the simulation.
`TOGGLE_ALL_STARTERS`	N/A	Toggle starters
`TOGGLE_MASTER_STARTER_SWITCH`	N/A
`TOGGLE_STARTER1`	N/A	Toggle starter 1
`TOGGLE_STARTER2`	N/A	Toggle starter 2
`TOGGLE_STARTER3`	N/A	Toggle starter 3
`TOGGLE_STARTER4`	N/A	Toggle starter 4